QUALITY COMMERCIAL GROUNDING STRAPS MANUFACTURED IN THE UNITED STATES SINCE 1993 BUILT TO AGS STANDARDS.

All AGS  Terms & Conditions of Sales  apply.   Testing, if required, is at customer's expense and written criteria. Results TBD. Not built to Mil-spec.

PLEASE SCROLL DOWN THE ENTIRE FORM AND CHECK ALL THAT APPLIES

CUSTOM GROUND STRAPS and WIRES . RoHS COMPLIANT straps available upon request.

Please check all boxes that apply.
Select one of these types only. REFERENCE TYPE (optional)    CLICK HERE TO VIEW
BRAIDED GROUND STRAP
GROUNDING WIRE
COPPER ROPE STRAP ULTRA FLEXIBILITY WITH TWISTING AND LATERAL MOVEMENT )
STAINLESS STEEL STRIP   SOLID COPPER STRIP  

Straps are to be RoHS Compliant.

LENGTH  (ALL STRAPS ARE MEASURED FROM HOLE CENTER TO HOLE CENTER IN INCHES - C2C)


TERMINATION  (Standard: Types "A" & "D")
A B C Type "A" terminals (Panduit)

UL and CSA rated up to 2000V per UL486A
Maximum recommended operating temperature 302°F (150°C)

D    SOLDER DIPPED, PUNCHED & CHAMFERED
E    FOLDED .080, .010 & .0216 THICK COPPER STRIP, TINNED ONLY
F    PRESSED COPPER TUBE, TINNED OR BARE COPPER
G    SOLID COPPER PER ASTM B75, .0216 THICK 3/4 WIDE, C110, ANNEALED, PUNCHED HOLES

 WITH .0005 NICKEL PLATE (CLASS1, GRADE G, PER SAE AMS-C-26074) FINISH.

H    SOLID 304 STAINLESS STEEL STRIPS 1/2 & 3/4 WIDE, 0.20 THICK 

 WITH OR WITHOUT A HEAT SHRINK OVERLAY, PUNCHED HOLES

I ..J ..K   ..L ..M ..N ..O
P ..Q   ..R   ..S ..T ..U .
V    (only in 14 gauge for stud sizes #6, #8 & #10)   ..W   Multiple Stud  6-8-10 (22-14 gauge only)    

          
TERMINAL 1 SIZE  . TERMINAL 2 SIZE    . SEE  SIZE CHART  FOR PUNCHED HOLES OR HELP

 TERMINALS TO BE MADE OF
BC= BARE COPPER TC= TINNED COPPER (STANDARD)
NPC= NICKEL PLATED COPPER TERMINALS  ("A" ONLY) NPS= NICKEL PLATED STEEL  TERMINALS ("A" ONLY)

Nickel Plated terminals are used in hi-temp applications or where corrosion is a concern.

TERMINALS TO BE    STRAIGHT  OR   REVERSED  


Braided Ground Straps Only    

FLAT (STANDARD)    BRAID WIDTH  
                            OR
TUBULAR    DIAMETER  

AMP CAPACITY   GAUGE

BRAID MATERIAL: STOCK NUMBER (OPT) SEE BRAID STOCK ( be sure to use your back arrow so you do not loose your input thus far )

WHAT TYPE OF BRAID DOES  YOUR APPLICATION  NEED (REQUIRED INFO)
BC= BARE COPPER,   TC= TINNED COPPER (STANDARD),  NPC= NICKEL PLATED COPPER,  SS= STAINLESS STEEL,   AL=ALUMINUM,   SPC=SILVER PLATED COPPER,  


Grounding Wires Only  

WIRE COLOR UL VOLTS  TEMPERATURE RATING
STRANDED SOLID AWG NEEDED
TERMINALS TO BE: INSULATED NON-INSULATED


Rope Ground Straps Only  

BARE COPPER   TINNED COPPER     AWG OR DIAMETER


Ground Straps Insulation Requirements

NONE
OVERLAY WITH HEAT SHRINK

BLACK     GREEN W/YELLOW STRIPE     GREEN     CLEAR    SPECIFY OTHER COLOR
 


DESIRED DOCK DATE   (NORMAL LEADTIME IS 3-4 WEEKS ARO)

QUANTITY NEEDED FOR QUOTE  25 PIECES MINIMUM (REQUIRED FIELD)


COMMENTS, NOTES, AND QUESTIONS


Your Name :

Company Name:

Address 1:

Address 2:

City, State & Zip

Phone Number:

Fax Number:

E-Mail Address: Required

THANK YOU FOR YOUR INTEREST IN AMERICAN GROUNDING SYSTEMS PRODUCTS.

WE WILL PROVIDE A QUOTE FOR YOU SHORTLY.

Sorry, without your fax number or e-mail address we have no way to reply to your request.

CONTACT US


TC- TINNED COPPER,  NPC- NICKEL PLATED COPPER,  NPS- NICKEL PLATED STEEL
MAY NOT BE AVAILABLE IN ALL WIRE GAUGES

RETURN
NOTE: FACTIONAL NUMBERS INDICATE CRIMPED RING TERMINALS - DECIMALS INDICATED SOLDER DIPPED AND PUNCH.

CRIMPS FOR STUD SIZES SOLDER DIPPED & PUNCHED RING TERMINAL TC NPC NPS AVAILABLE PUNCH SIZES FOR TYPES "A" & "D"
Attn: These are hole sizes - one size over stud size recommended.
. YES . . . . .062  (1/16)
. YES . . . . .078  (5/64)
. YES . . . . .093  (3/32)
#4 YES YES YES . . .109  (7/64)
. YES . . . . .125  (1/8)
#6 YES YES YES YES YES .140  (9/64)
.. YES . .. .. . .156  (5/32)
#8 YES YES YES YES YES .171  (11/64)
  YES   . . . .187  (3/16)
#10 YES YES YES YES YES .203  (13/64)
. YES . . . . .218  (7/32)
. YES . . . . .234  (15/64)
. YES . . . . .250  (1/4)
1/4 YES YES YES YES  YES .265  (17/64)
. YES . . . . .281  (9/32)
. YES . . . . .296  (19/64)
. YES . . . . .312  (5/16)
5/16 YES YES YES YES YES .328  (21/64)
. YES . . . . .343  (11/32)
. YES . . . . .359  (23/64)
. YES . . . . .375  (3/8)
3/8 YES YES YES YES YES .390  (25/64)
. YES . . . . .406  (13/32)
. YES . . . . .421  (27/64)
. YES . . . . .437  (7/16)
7/16 YES YES YES . . .453  (29/64)
. YES . . . . .468  (15/32)
  YES     . . .484  (31/64)
1/2 YES YES YES .. .. .500  (1/2)
5/8 NO YES YES . . NOT AVAILABLE
3/4 NO YES YES . . NOT AVAILABLE
7/8 NO YES YES . . NOT AVAILABLE

GROUND STRAP TYPES
(Reference Only)

RETURN

A

B

C

D

E

F

G

H

I

J

K1

K2

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

A1

A2

A3


 BARE COPPER WIRE ROPE

A4


 TINNED COPPER WIRE ROPE

A5


BARE COPPER STRIP WITH TINNED ENDS

A6


COPPER STRIP WITH TINNED ENDS

A7

A8

RETURN

HOME

.AMERICAN GROUNDING SYSTEMS, INC.
385 NW 1st, Unit 1
Toledo, OR 97391
541-336-2426   FAX 541-336-2427  
sales@ags.bz
  engineering@ags.bz

PURCHASE ORDER MUST HAVE THE AGS QUOTE NUMBER PRINTED ON IT IN ORDER TO BE ACCEPTED BY AGS,
WHICH ACKNOWLEDGES ACCEPTANCE OF ALL AGS TERMS AND CONDITIONS AS QUOTED.

AGS GROUND STRAPS ARE MANUFACTURED TO ORDER AS COMMERCIAL PRODUCT TO AGS STANDARDS ONLY.

THESE TERMS ARE PART OF OUR QUOTE AND WILL APPLY REGARDLESS OF TERMS or CONDITIONS OF PURCHASE ORDER.
PURCHASE ORDER MUST HAVE THE AGS QUOTE NUMBER PRINTED ON IT IN ORDER TO BE ACCEPTED BY AGS THEREBY HAVING ACKNOWLEDGED ACCEPTANCE OF ALL AGS TERMS AND CONDITIONS AS QUOTED.

. Conditions and Terms of Sale

1

AGS GROUND STRAPS ARE INTENDED FOR COMMERCIAL-INDUSTRIAL USE and ARE MANUFACTURED TO ORDER AS COMMERCIAL/INDUSTRIAL PRODUCT ONLY

2

QUOTE IS VALID FOR 30 DAYS FROM DATE OF QUOTE.

3

ALL TRANSACTIONS ARE FILED AND KEPT FOR A MAXIMUM OF 90 DAYS ONLY

4

DISCOUNT (PER DELIVERY PER LINE ITEM) MINIMUM TO 99 is at BASE PRICE,  100-249 -2%,  250-499 -5%,  500-999 -7%,  1000+ -10%

5

WE DO NOT BUILD TO ANY GIVEN MIL-SPEC. NOR TO CUSTOMER'S QUALITY PROGRAM OR STANDARDS. ALL STRAPS ARE BUILT TO AGS STANDARDS ALONE.

6

ALL STRAPS ARE MEASURED HOLE CENTER TO HOLE CENTER (C2C)

7

TERMS: CREDIT CARD, COD, NET 30 FOR OPEN ACCOUNTS (MINIMUMS APPLY)

8

ALL SHIPMENTS FOR WHICH WE DO NOT HAVE A UPS ACCOUNT NUMBER WILL SHIP FOB ORIGIN WITH SHIPPING CHARGES ADDED TO INVOICE.

9

ALTHOUGH WE MAKE CUSTOM STRAPS, WE ARE NOT A SPECIALTY SHOP BUT DEAL IN HIGHER VOLUMES AND REOCCURRING MANUFACTURING.

10

ALL STATE TAXES, IF APPLICABLE, WILL BE THE RESPONSIBILITY OF THE CUSTOMER.

11

RETURNS FOR ANY REASON REQUIRE A RMA NUMBER ISSUED BY AGS.

12

THESE TERMS ARE PART OF OUR OFFER TO SELL AND WILL APPLY REGARDLESS OF CUSTOMER TERMS  AND/OR  CONDITIONS INCLUDED WITH PURCHASE ORDERS.

13

ALL TRANSACTION SHALL BE GOVERNED UNDER THE LAWS OF THE STATE OF OREGON.

We do not accept orders that have conditions, specifications, or internal customer regulations for standards. Products are built to AGS, Inc. specifications, standards and design only. AGS offers no certification other than our standard certification of conformance. Any additional documentation submitted or referenced on a purchase order constitutes a custom strap and will be billed as a custom order if accepted by AGS. AGS grants no warranties written or implied, nor guaranties that standard products produced in our facilities will meet customers's requirements, specifications or application. Such determination must be made by the customer before purchase.

AGS does after review and acceptance of submitted drawings and documentation manufacture custom ground straps to customer's specifications provided such specifications are supplied in full written form at time of request.
UNDER NO CIRCUMSTANCES WILL ANY REQUIREMENTS, AFTER THE FACT OR QUOTE BE ACCEPTED OR BINDING ON ANY ORDER- PERIOD!  IF A CUSTOMER SUBMITS REQUIREMENTS TO THE ORDER AFTER THE QUOTE HAS BEEN SUBMITTED- ANY REQUIREMENTS SUBMITTED IN THE PURCHASE ORDER OR AFTER THE FACT WILL ABSOLUTELY NOT BE BINDING, NOR WILL THEY PERMIT AN ORDER THAT HAS BEEN BUILT TO BE REJECTED. EXCEPTION: ONLY IF SO AGREED TO BY AGS, HOWEVER, SUCH REQUIREMENTS WILL BE BILLED AT $50.00 PER HOUR FOR AS MANY HOURS AS IT TAKES TO COMPLETE OR COMPLY TO CUSTOMERS DOCUMENTATION REQUIREMENTS.

 Specifications referenced on any drawing or purchase order that have not been submitted for review in full form will not be binding on any order. Referenced specifications, terms of purchase or any required documentation posted on a customer's website will not be accepted by AGS or binding on any order. At customer's request, a first article will be supplied for review prior to production . Acceptance and conformance is to be determined by the customer upon receipt of order. Prototypes are a chargeable item and will be billed as time and materials. A sample of a standard part may be supplied to the customer upon request- subject to cost and material on hand. Special order items will have incoming freight charges billed to the customer.

If drawings are submitted to AGS for the purpose of soliciting a RFQ/RFP, only documentation supplied in full written form, and at the time of the request, shall be binding on any quote. Any omissions of referenced documents or specifications, including military specifications, called out on drawings shall not be deemed to be inclusive to the quote. All relevant documents shall be submitted to AGS by the customer and all relative paragraphs shall be clearly identified. Subsequent submissions may affect price, delivery or acceptance of order. AGS does not supply customer's specialized certification or comply with customer's quality programs. Any additional required documentation will be a chargeable item. Engineering cost shall apply and be invoiced as NRE. Set up fees may apply to custom orders. Any required testing shall have pass/fail criteria, procedures, requirements and protocol fully documented in written form so as to be presentable to UL or Environ Laboratories or other customer authorized testing facilities prior to testing. All charges for such testing  and reports are to be paid for up front and in full prior to testing. Testing charges are not refundable regardless of test results. Logistical charges may also apply. Testing shall be based upon customer's desired sample size. Product so tested will be paid for by the customer. AGS can not ascertain if a ground strap will meet customer's requirements until test results have been compiled and documented. "Qualification" will be the decision of the customer alone. Some test my be "destructive" which means the strap(s) can not be used- however they will be billed to the customer for time and materials.

Any returns for credit, replacement or repair require a RMA number. Liability is limited to replacement, repair, or refund if straps have been determined not to have been built to drawing requirements. AGS can not control how our ground straps are used or under what conditions or environment they are used therefore all straps are used at customer's risk and will hold American Grounding Systems, Inc. harmless for any and all incidents. Custom straps that have been manufactured in compliance to customer's specifications including verbal changes or variance made by customer's representative can not be returned. Returns are to be by UPS Ground Service only. By receiving and accepting any AGS products customer is in full agreement with these terms.

Although AGS ground straps may, at customers request, be built with Mil-Spec materials and/or parts, AGS ground straps are not built to any given military specification.

All material on this website in owned and copyrighted by AGS 2000-2017

TOP

HOME